Installing Upgrades; Getting The Cluster Status Of Local Node; Compaction Service - Quantum DXi V-Series Manual

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014

Installing Upgrades

Getting the Cluster
Status of Local Node

Compaction Service

88
syscli --install upgrades --name <ID>
This CLI command allows the admin user to install the downloaded upgrade to
the system.
CLI command options:
• --install upgrades: Installs the downloaded upgrade. The upgrade can and
must be downloaded first using the --download upgrades.
• --name: Name. This is the ID variable (from --list upgrades) of the upgrade
to be installed.
syscli --getstatus node
This CLI command allows the user to display the cluster status of the node
where the system is running on.
The following compaction service commands are available:
• Starting Compaction Service
• Stopping Compaction Service
• Getting Status for the Compaction Service
Starting Compaction Service
syscli --start compaction
This CLI starts the general space compaction service on demand.
Note: An automated service will perform a compaction when needed, so use
of this command may not be necessary.
The --start option starts the general space compaction service.
Stopping Compaction Service
syscli --stop compaction
This CLI stops the general space compaction service on demand.
Note: An automated service will perform a compaction when needed, so use
of this command may not be necessary because you might stop
compaction that occurs from the automated service.
The --stop option stops the general space compaction service.
Getting Status for the Compaction Service
syscli --getstatus compaction
This CLI gets the status for space compaction.
Utility CLI Commands