Quantum DXi V-Series Manual page 101

Utility CLI Commands
License Name = De‐Duplication
Installed = Yes
Date Installed = 2009
License Description = Enables De‐Deduplication
[License = 4]
License Name = Replication
Installed = Yes
Date Installed = 2009
License Description = Enables Replication
[License = 5]
License Name = Storage Capacity
Installed = Yes
Date Installed = 2009
License Description = Limit Storage Capacity
[License = 6]
License Name = OST
Installed = No
Date Installed = ‐‐ Not Installed ‐‐
License Description = Limit Open Storage Server Connections
[License = 7]
License Name = Vision
Installed = No
Date Installed = ‐‐ Not Installed ‐‐
License Description = Enables Advanced Reporting
Adding a License
syscli --add license --key <license_key>
This CLI command allows the admin user to add a license on the system. The
user needs to provide a key corresponding to the license.
Note: For DXi4510 and DXi 4520 systems, all available licenses are
pre-installed at the factory. There is no need to add licenses to these
systems.
Note: After adding a storage capacity license to DXi4601, you must reboot
the DXi to complete the storage capacity upgrade. The new storage
capacity will not be available until you reboot the DXi.
Quantum DXi-Series Command Line Interface (CLI) Guide
- -
06 01 15:32:42
- -
06 03 08:59:17
- -
06 01 15:32:24
6-67081-09 Rev B
February 2014
91