Quantum DXi V-Series Manual page 70

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
60
• --healthcheck: Indicates this is a scheduled healthcheck event.
Note: Healthcheck requires a daily or weekly recurrence not to exceed
every 7 days or once a week.
• --emailreports: Indicates this is a scheduled email reports event. This will
send the --type to all recipients in the list obtained from syscli --get
emailhome.
• --type: Specify which report is wanted.
• --replication: Indicates this is a scheduled replication event.
• --name: Specify a valid VTL or NAS share name.
• --target: Target host name or IP of the replication event. If the system or the
share/partition has two targets configured, you must use the --target
option and you must specify a target IP or hostname. If the system or the
share/partition has no target configured, invoking the commands will result
in error.
• --start: Start date and time.
Note: Date and time can be entered in any order, but if spaces are used to
separate the time and date, then quotes must be used. This date/
time will be used to specify when the event is to occur. In the case
of a recurring event, portions of this date/time will be used for
recurrence. For instance, a yearly recurrence will recur on the same
day and time each year.
• --end: End date and time.
Note: Date and time can be entered in any order, but if spaces are used to
separate the time and date, then quotes must be used. This date/
time will be used to tell when an event will end.
If --end is not specified, then an open ended event will be generated.
• --daily: Recur daily starting at the time obtained from the --start
specification.
• --weekly: Recur weekly on specified days (comma separated for multiple
days) starting at the time obtained from the --start specification.
• --monthly: Recur monthly on the day and time obtained from the --start
specification.
• --monthday: Recur monthly on a specific weekday within the month
starting at the time obtained from the --start specification. If last is
specified, then the event will occur on the last day of each month.
ex: 2mon : recur on the second Monday within the month.
• --yearly: Recur yearly on the month, day, and time obtained from the --start
specification.
• --yearday: Recur on a specific weekday within the month and starting at the
time, both obtained from the --start specification.
ex: 2mon : recur on the second Monday within the month.
Scheduler CLI Commands (DEPRECATED)