Space Reclamation - Quantum DXi V-Series Manual

Space Reclamation

Utility CLI Commands
The --getstatus option returns the following status for space compaction:
Output data:
Compaction Status =
Status Progress = 0 %
Start Time =
End Time =
Compacted = 0.00 MB
Still to compact = 0.00 MB
The following space reclamation commands are available:
• Starting Space Reclamation
• Stopping Space Reclamation
• Displaying the Current Reclamation Status
Starting Space Reclamation
syscli --start reclamation
This CLI command allows the admin user to manually start space reclamation on
the system.
Stopping Space Reclamation
syscli --stop reclamation
This CLI command allows the admin user to stop any current space reclamation
on the system that is running.
Displaying the Current Reclamation Status
syscli --getstatus reclamation
This CLI command allows the user to retrieve the current status for general
space reclamation. An example of the output for --getstatus reclamation is
shown below:
Output data:
Reclamation Status =
Stage Status Progress = 100 %
Total Progress = 100 %
Start Time = Tue Nov 6 10:55:33 2012
End Time = Tue Nov 6 10:55:39 2012
Data Scanned = 0.00 MB
Number of Stages = 2
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
89