Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
Node Management
License Management
90
Reclaimable Space = 0.00 MB
More information regarding space reclamation can be found in two reports that
are produce by Quantum's DXi Advanced Reporting (DAR) application.
• The Space Reclamation Report presents space reclamation progress and
space reclamation in bytes.
• The Disk Usage graph in the Capacity Report presents reclaimable space,
which is the amount of disk space available for new deduplicated data.
syscli --nodemanage --reboot | --shutdown | --resetdiag [--node {1 | 2|
all}] [--sure]
This CLI command allows the admin user to reboot, shutdown or reset the
diagnostic state on a node. If the --sure option is specified, no confirmation
prompt is displayed. Note that --node 2 is an invalid option in release 2.x.
The following license management commands are available:
•
Displaying Licenses
•
Adding a License
•
Getting License Status (DXi V-Series only)
•
Activate a License (DXi V-Series only)
Displaying Licenses
syscli --list license
This CLI command allows the user to list the available licenses on the system. An
example output of available licenses is shown below:
List of Licenses:
Total count = 7
[License = 1]
License Name = NAS
Installed = No
Date Installed = ‐‐ Not Installed ‐‐
License Description = Expose NAS interface to host
[License = 2]
License Name = Backup Application Specific
Installed = No
Date Installed = ‐‐ Not Installed ‐‐
License Description = Enables Backup Application Specific
[License = 3]
Utility CLI Commands