Initiating Source To Target Cartridge Or File Synchronization; Generating A Replication Report; Listing The Allowed Replication Sources For The Target; Adding A Source On A Target - Quantum DXi V1000 Command Manual

Initiating Source to
Target Cartridge or File
Synchronization
Generating a
Replication Report
Listing the Allowed
Replication Sources for
the Target
Adding a Source on a
Target
Replication CLI Commands
syscli --getstatus naslock --name <NAS_share_name>
This CLI command allows the user to retrieve the status of the lock for the
specified NAS share.
syscli --sync vtl --name <VTL_name>
This CLI command allows the CLI admin to initiate source to target cartridge
synchronization for a specified VTL that has cartridge based replication enabled.
syscli --sync nas --name <NAS_share_name>
This CLI command allows the admin user to Initiate source to target file or
directory synchronization for specified NAS share that has file/directory based
replication enabled.
syscli --genrpt replication
This CLI command allows the user to generate namespace and trigger based
replication reports. The actual report can be retrieved using the remote GUI
(under Data Services > Replication > Reports).
syscli --list sourcerep
This CLI command lists the allowed replication source(s) IP or hostname for this
system as a target.
Output data:
List of all allowed replication source IP for this system as a
target:
Total count = 4
[sourcerep = 1]
IP = 10.40.50.70
[sourcerep = 2]
IP = 10.40.50.71
[sourcerep = 3]
IP = 10.40.100.139
[sourcerep = 4]
IP = 10.40.100.140
syscli --add sourcerep --hostid <host_id>
This CLI command allows the admin user to add or specify the replication source
IP or hostname of a source DXi system for this system as a target.
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
39