Quantum DXi V1000 Command Manual page 266

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
258
Error Code Error Message
E6553373 ChangeEvent: Option "throttle" is required because another
optional option is specified!
E6553375 ChangeEvent: Option "service" is required because another
optional option has been specified!
E6553381 ChangeEvent: Failed to read/get option "all".
E6553382 ChangeEvent: Failed to write/set option "all".
E6553411 ChangeEvent failed!
E6553601 GetEvent: Option "get" is missing.
E6553602 GetEvent: Option "get" requires a value
E6553603 GetEvent: Option "get" has invalid value
E6553604 GetEvent: Failed to read/get option "get".
E6553605 GetEvent: Failed to write/set option "get".
E6553611 GetEvent: Option "id" is missing.
E6553612 GetEvent: Option "id" requires a value
E6553613 GetEvent: Option "id" has invalid value
E6553614 GetEvent: Failed to read/get option "id".
E6553615 GetEvent: Failed to write/set option "id".
E6553661 GetEvent failed!
E6554001 GetEventtypes: Option "get" is missing.
E6554002 GetEventtypes: Option "get" requires a value
E6554003 GetEventtypes: Option "get" has invalid value
E6554004 GetEventtypes: Failed to read/get option "get".
E6554005 GetEventtypes: Failed to write/set option "get".
E6554051 GetEventtypes failed!
E6590999 Authentication failed!
E6591001 Attempt to create the event failed: invalid arguments.
E6591002 Attempt to create the start action failed: invalid arguments.
E6591003 Attempt to create the end action failed: invalid arguments.
E6591004 Failed to open events: event instance does not exist.
E6591005 Failed to open events: invalid arguments.
E6591006 Failed to open events: event does not exist.
E6591007 Failed to open events: invalid id.
CLI Error Codes