Quantum DXi V1000 Command Manual page 120

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
112
Error Code Error Message
E130003 Invalid characters in IPv4 address
E130004 The decimal value in IPv4 address is out of range
E130005 The IPv6 address is invalid
E130006 The IP address is too long
E130007 The IP address is too short
E130008 The IPv6 address has too many colons
E130009 The IPv6 address has no colons
E130010 The IP address has invalid characters
E130011 The IPv6 address has too many hexadecimal digits
E130012 The IPv6 address has too many double colons
E130013 The IPv6 bitcount/NetId is not a decimal value
E130014 The IPv6 bitcount/NetId is out of range
E130015 IP Address has invalid format
E130016 Cannot derive hostname from IP Address
E130017 IP Address missing!
E130018 Invalid value for number of netmask bits
E130019 Too many decimal points in IPv4 address
E130020 Leading decimal number in IPv4 address is missing!
E130021 Ending decimal number in IPv4 address is missing!
E130022 Missing decimal number between decimal points in IPv4
address
E140001 Emailaddress entered is empty.
E140002 Emailaddress entered has invalid characters.
E140003 Missing '@' in emailaddress entered.
E140004 Username is missing in the email address.
E140005 Domain Name or Host Name is missing in the email address.
E140006 Too many '@' signs in emailaddress entered.
E140007 Must use dotted decimal domain name notation such as
abc.com
E140008 Domain name cannot begin with a dot.
E140401 Hostname Invalid.
E140402 Hostname cannot start or end with special characters.
CLI Error Codes