Quantum DXi V1000 Command Manual page 118

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
110
Error Code Error Message
E110009 Neither NDMP PTT or OST features are licensed!
E110020 Failed to check license!
E110021 Feature not licensed!
E111001 Feature "Connect EMC" is not supported on this system!
E111002 Feature "Email Home" is not supported on this system!
E111003 Feature "iSCSI" is not supported on this system!
E111004 Feature "NPIV" is not supported on this system!
E111005 Feature "FC Switch" is not supported on this system!
E111006 Feature "Integrated Path-To-Tape" is not supported on this
system!
E111007 Feature "Private VTDs for ShadowCopy Path2Tape" is not
supported on this system!
E111008 Feature "NDMP Path-To-Tape" is not supported on this
system!
E111009 Feature "NAS" is not supported on this system!
E111010 Feature "global dedup/backup window config" is not
supported on this system!
E111011 Feature "global replication config" is not supported on this
system!
E111012 Feature "all initiators to all targets dev mapping" is not
supported on this system!
E111013 Feature "vDisk" is not supported on this system!
E111014 Feature "VTL VPD page 0xEF support for Networker" is not
supported on this system!
E111015 Feature "Storage Array Diagnostics" is not supported on this
system!
E111016 Feature "Replication from triggering AutoUnPack" is not
supported on this system!
E111017 Feature "OST" is not supported on this system!
E111018 Feature "Network Segmentation" is not supported on this
system!
E111019 Feature "IPv6" is not supported on this system!
E111020 Feature "VTL" is not supported on this system!
E111021 Feature "License Key" is not supported on this system!
E111022 Feature "Deduplication" is not supported on this system!
CLI Error Codes