Quantum DXi V1000 Command Manual page 96

Dxi series command line interface (cli)
Hide thumbs Also See for DXi V1000:
Table of Contents

Advertisement

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
88
First, delete the default bond configuration with all customer ports connected
together:
syscli --del netcfg --devname bond0
Then configure Eth0 for IPADDR1 and, if applicable, configure GATEWAY1:
syscli --add netcfg --devname eth0 --ipaddr IPADDR1 --netmask NETMASK1 -
-gateway GATEWAY1
Then configure Eth1 for IPADDR2 and, if applicable, configure GATEWAY2:
syscli --add netcfg --devname eth1 --ipaddr IPADDR2 --netmask NETMASK2 -
-gateway GATEWAY2
Deleting a Bond and Setting Up Independent Interfaces
This section provides an example for using the netcfg CLI command to delete a
bond that has eth0 and eth1 as slaves and set them up as independent
interfaces. The DXi ships with all ports bonded, and you must undo bonding if
you want to use the individual Ethernet ports to communicate with other
systems on separate subnets.
1 Display the output of the current runtime network values using syscli
--show netcfg to list the current runtime values. (Runtime values are those
values that are currently used by the network service. Values must first be
configured using the add and delete netcfg commands. In order for these
values to become runtime values, the system must be rebooted. This will
restart the network service. You can use the syscli --nodemanage --reboot
command to reboot the system after all network configuration has been
done.)
Note: The WARNING: No Replication IP configured message at the
bottom means that an interface was not configured specifically for
replication. An interface can be configured for replication using the
--policy REP option in the syscli --add netcfg command if desired.
[root@rok‐dxi92 DXi]# syscli ‐‐show netcfg
bond0     Link encap:Ethernet  HWaddr 00:50:56:AB:00:48
          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
          RX packets:557471 errors:155 dropped:0 overruns:0 frame:0
          TX packets:48114 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:48747984 (46.4 MiB)  TX bytes:6195223 (5.9 MiB)
bond0:2   Link encap:Ethernet  HWaddr 00:50:56:AB:00:48
          inet addr:10.20.185.92  Bcast:10.20.191.255  
Mask:255.255.248.0
          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
eth0      Link encap:Ethernet  HWaddr 00:50:56:AB:00:48
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:278735 errors:5 dropped:0 overruns:0 frame:0
          TX packets:24057 errors:0 dropped:0 overruns:0 carrier:0
Network CLI Commands

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxi4000 seriesDxi6500 seriesDxi6700 seriesDxi8500

Table of Contents