Quantum DXi V1000 Command Manual page 119

CLI Error Codes
Error Code Error Message
E111023 Feature "Replication" is not supported on this system!
E111024 Feature "Storage Capacity" is not supported on this system!
E111025 Feature "RAID Performance Display" is not supported on this
system!
E111026 Feature "Backup Apps Display" is not supported on this
system!
E111027 Feature "Vision DXi" is not supported on this system!
E111028 Feature "Vision DXi for Service" is not supported on this
system!
E111029 Feature "LCD" is not supported on this system!
E111030 Feature "CCL" is not supported on this system!
E111031 Feature "GC Scheduled Stop Time" is not supported on this
system!
E111032 Feature "DRO" is not supported on this system!
E111040 Multinode is not supported on this system!
E111041 Storage Array is not supported on this system!
E111042 Ethernet Switch is not supported on this system!
E111043 Boot Disk is not supported on this system!
E111044 Compression Adapter is not supported on this system!
E111045 FC Adapter is not supported on this system!
E111046 Network Port is not supported on this system!
E111047 10G Ethernet network configurations options are not
supported!
E111048 1G Ethernet network configurations options are not
supported!
E111049 Advanced options are not enabled!
E111050 Feature Dummy is not supported on this system!
E111051 Feature "no_root_squash" for NFS shares is not supported on
this system!
E111052 Feature Accent is not supported on this system!
E111053 Feature AIS Connect is not supported on this system!
E120001 Unable to load Seer
E130001 Missing decimal point in IPv4 address
E130002 Missing decimal value in IPv4 address
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
111