Quantum DXi V1000 Command Manual page 238

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
230
Error Code Error Message
E6000459 UpgradeFirmware: System not ready for firmware upgrade,
system is not in cluster.
E6000460 UpgradeFirmware: Verify New Image utility is not found.
E6000461 UpgradeFirmware: Install New Image utility is not found.
E6000462 UpgradeFirmware: Failed getting current directory.
E6000463 UpgradeFirmware: From host specified is not responding.
E6000464 UpgradeFirmware: Specified firmware file on the specified
host not found.
E6000465 UpgradeFirmware: Filename for firmware file must be full
path.
E6000501 UpgradeFirmware failed!
E6000801 StartReclamation: Option "start" is missing.
E6000802 StartReclamation: Option "start" requires a value
E6000803 StartReclamation: Option "start" has invalid value
E6000804 StartReclamation: Failed to read/get option "start".
E6000805 StartReclamation: Failed to write/set option "start".
E6000821 StartReclamation failed!
E6001201 StopReclamation: Option "stop" is missing.
E6001202 StopReclamation: Option "stop" requires a value
E6001203 StopReclamation: Option "stop" has invalid value
E6001204 StopReclamation: Failed to read/get option "stop".
E6001205 StopReclamation: Failed to write/set option "stop".
E6001221 StopReclamation failed!
E6001601 GetReclamation: Option "get" is missing.
E6001602 GetReclamation: Option "get" requires a value
E6001603 GetReclamation: Option "get" has invalid value
E6001604 GetReclamation: Failed to read/get option "get".
E6001605 GetReclamation: Failed to write/set option "get".
E6001606 GetReclamation: Failed to get the reclamation schedule daily
time.
E6001607 GetReclamation: Failed to get the reclamation schedule
weekly time.
E6001608 GetReclamation: Failed to get the reclamation schedule type.
CLI Error Codes