Cancelling A Command; Selecting And Cancelling A Command - ABB REC 561 User Manual

1MRK 580 156-XEN
Page 3 - 26

5.4 Cancelling a command

5.5 Selecting and
cancelling a command
Local man machine
communication
Fig. 6 shows a typical dialogue window that lets you cancel a command.
Use the right or left arrows to move to YES, NO or CANCEL. Then select
E to confirm your selection. If you select CANCEL confirmed with E,
you return to the window that was shown on the display before the dia-
logue window appeared.
Instruction 1
Instruction 2
YES
NO CANCEL
Fig. 6 Dialogue window for a command with cancellation
Instruction
Command
YES NO
CANCEL
Fig. 7 Dialogue window for a command with a selection
Here you can select the command in row two, which is indicated by the up
or down arrow at the end of the row.
Use the right or left arrows to position the cursor on YES, NO or CAN-
CEL. Select YES to execute the command. Select NO or CANCEL to
cancel and exit the dialogue window.
ABB Network Partner AB
Version 1.0-00
(X80156-6)
(X80156-7)