ABB REC 561 User Manual page 51

1MRK 580 166-XEN
Page 3 - 2
Installation and commissioning
Fig. 1 19" rack mounting
If more than one terminal is to be placed side-by-side, you need a special
side-by-side mounting kit. It consists of two plates and screws with
TORX T20 type grips.
1. Fasten the mounting angles—one on each terminal—with the
includes screws.
2. Fasten the terminals together with the two plates—one on top of the
two terminals and one on the bottom. See Fig. 2.
ABB Network Partner AB
Version 1.0-00
(X80166-1)