Chapter 4 Retrofitting Options
To Retrofit A5 DC Power Input Assembly (Option 002)
Retrofitting Procedure
1
Slide A1 Motherboard Assembly into the new chassis (MP10) as
shown in Figure 4-1A.
H3
H5
H4
H5
H1
Figure 4-1A. DC Power Input Assembly Retrofitting
2
Insert but do not tighten the three TORX 15 screws (H1) that
attach A1 Motherboard Assembly to the new chassis (MP10) as
shown in Figure 4-1A.
3
Insert and tighten the three BNC nuts (H3) onto the BNC
connectors that protrude from the rear of the chassis using the
14-mm deep-socket spin tight.
Assembly-Level Service Guide
H1
MP10
A1 Motherboard
Assembly
H1
4-5