Table of Contents
Advertisement
For 2�5" SATA Drives
To install more than one 2.5" SATA drive, use the 5.25" optical drive tray. And to install more than
one 3.5" SATA drive, please order another HDD drive tray as shown in the following procedure.
Please use the following procedure to install a second and third 2.5" HDD/SSD:
1.
Attach 4 standoffs to the 2.5" HDD or SSD.
2.
Secure the hard drive to the optical drive tray. Align the standoffs on the HDD with the
mounting holes on the optical drive tray. Use 4 mounting screws to install the hard drive
onto the optical drive tray.
Chapter 3 Installing Devices
Chapter 3
3. Install the optical drive tray back to the system.
4. Connect the SATA data cable and power cable to the connectors on the SATA drive. And con-
nect the other end of the SATA data cable on the motherboard.
Mounting screw
Mounting screw
Mounting screw
Mounting screw
19
www.dfi.com
Advertisement
Table of Contents
