DFI WM343-KD330 User Manual page 21

Installing a Mini PCIe Card
The system board is equipped with one Mini PCIe slot that uses USB, PCI and mSATA signals.
1. Grasp the Mini PCIe card by its edges and align the notch in the connector of the PCIe
card with the notch in the connector on the system board.
2. Push the Mini PCIe card down and use the provided mounting screws to secure the card on
the system board.
Note:
The Mini PCIe slot is available in WM343-KD330 (only Intel
Chapter 3 Installing Devices
Chapter 3
Installing an M�2 Card
The system is equipped with one M.2 socket, supporting both the M.2 22x60mm and 22x80mm
(key M) form factors. Use the following procedure to install an M.2 card:
1.
2.
3.
Mounting screw
® Q170 Chipset).
21
To install an M.2 type 2260 card, please install the standoff at the 60mm mounting
position first.
Align the notch at the edge of the M.2 card with the key in the connector.
Insert the M.2 card into the connector.
Note:
The M.2 slot is available in WM343-KD331 (both Intel
the SKU with Intel ® C236 chipset further supports Intel
standoff
M.2 card
®
C236 and Q170 chipsets) and
® Optane™ memory.
www.dfi.com