Table of Contents
Advertisement
SATA Controller(s)
Enable or disable Serial ATA controllers.
SATA Speed
Select Serial ATA device speed from Gen1 (1.5 Gbit/s), Gen2 (3 Gbit/s), Gen 3 (6
Gbit/s) or auto.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI Mode
This option allows the Serial ATA devices to use AHCI (Advanced Host Controller Interface).
RAID Mode
This option allows you to create RAID using Intel
Intel RST Premium With Intel Optane System Acceleration
Configure the SATA controller to use the "Intel RST Premium With Intel Optane System
Acceleration" mode to use this technology to accelerate system performance and respon-
siveness.
Note that only KD331-C236 supports Intel
Serial ATA Port 0 to 5 and Hot Plug
Enable or disable each Serial ATA port and its hot plug function.
SATA Port 5 controls the signal of the M.2 slot.
Note that for WM343-KD330 (KD330-H110), the SATA port will be numbered from 0 to 3.
And for WM343-KD330 (KD330-Q170),
signal of the Mini PCIe slot).
Chapter 7 BIOS Setup
®
Rapid Storage Technology.
Mode
Optane system acceleration.
®
it will be numbered from 0 to 4 (port 4 controls the
Chapter 7
USB Configuration
This section configures the parameters of the USB devices.
Legacy USB Support
Disabled
Disable USB keyboard/mouse/storage support.
Enabled
Enable USB keyboard/mouse/storage support.
UEFI Only
Enable USB keyboard/mouse/storage support only under the UEFI environment.
XHCI Hand-off
Enable this function for operating systems that do not support xHCI Hand-off. The XHCI
ownership change will be claimed by the XHCI driver.
52
www.dfi.com
Advertisement
Table of Contents
