13 WHEELS, TIRES
13.4
112
Installing the rear wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
H03001-10
H02375-10
V01325-11
Main work
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Clean and grease shaft seal rings
A
surfaces
of the spacers.
Long-life grease (
p. 157)
–
Insert the spacers.
–
Clean and grease the wheel spindle.
Long-life grease (
p. 157)
–
Position rear wheel and insert wheel spindle
The brake linings are correctly positioned.
–
Mount the chain.
–
3
Position chain adjuster
it yet.
–
Make sure that chain adjusters
5
adjusting screws
.
–
Check the chain tension. (
–
4
Tighten nut
.
Guideline
Nut, rear wheel spin-
dle
Info
The wide adjustment range of the chain adjusters
(32 mm (1.26 in)) enables different secondary ratios
with the same chain length.
3
Chain adjusters
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
Finishing work
–
Remove the motorcycle from the lift stand. (
1
and contact
2
.
4
. Mount nut
, but do not tighten
3
are fitted correctly on
p. 82)
M25x1.5
80 Nm (59 lbf ft)
can be turned by 180°.
p. 52)