Installing The Rear Wheel - Husqvarna 250 XC TPI 2021 Owner's Manual

13.4

Installing the rear wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Main work
–
Manually press the brake caliper toward the brake disc to push
back the brake piston.
Info
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake piston.
–
1
Remove nut
–
Take off chain adjuster
enough to allow the rear wheel to be pushed forward.
–
Push the rear wheel forward as far as possible. Remove the
chain from the rear sprocket.
Info
Cover the components to protect them against damage.
Warning
Danger of accidents Damaged brake discs reduce the
V01717-10
braking effect.
–
Always lay the wheel down in such a way that the
brake disc is not damaged.
–
Hold the rear wheel and remove the wheel spindle. Take the
rear wheel out of the link fork.
Info
Do not operate the foot brake lever when the rear wheel
is removed.
–
Remove spacers
H03002-10
.
2
. Pull out wheel spindle
4
.
WHEELS, TIRES 13
3
far
93