Agilent Technologies 1260 Infinity II User Manual page 215

5 Use the "/" and press Enter to list the current settings.
Figure 34 Telnet - Current settings in "Using Stored" mode
6 Change the IP address (in this example 192.168.254.12) and type "/" to list
Figure 35 Telnet - Change IP settings
InfinityLab LC Series 1260 Infinity II Binary Pump User Manual
current settings.
Manual Configuration
information about the LAN interface
MAC address, initialization mode
Initialization mode is Using Stored
active TCP/IP settings
TCP/IP status - here ready
connected to PC with controller software (e.g. Agilent
ChemStation), here not connected
change of IP setting to
Initialization mode is Using Stored
active TCP/IP settings
stored TCP/IP settings in non-volatile memory
connected to PC with controller software (e.g. Agilent
ChemStation), here not connected
12
LAN Configuration
215