Agilent Technologies 1260 Infinity II User Manual page 213

2 Type the following at the system (DOS) prompt:
InfinityLab LC Series 1260 Infinity II Binary Pump User Manual
• c:\>telnet <IP address> or
•
c:\>telnet <host name>
Figure 31 Telnet - Starting a session
where <IP address> may be the assigned address from a Bootp cycle, a
configuration session with the Handheld Controller, or the default IP
address (see "Configuration Switches"
When the connection was established successfully, the module responds
with the following:
Figure 32 A connection to the module is made
LAN Configuration
Manual Configuration
on page 206).
12
213