8
Maintenance
Installation of the Solvent Selection Valve Upgrade Kit
Installation of the Solvent Selection Valve Upgrade Kit
A solvent selection valve allows you to choose between four different solvents
that can be used with a binary pump. The valve switches between two solvents
A1 and A2 for channel A of the left pump head and two solvents B1 and B2 for
channel B of the right pump head.
Tools required
p/n
8710-0899
Parts required
p/n
G1381B
Preparations
Remove the solvent tubes from the Degasser
1
Break out the metal sheet piece to get access to the
connection socket inside (behind the pump front metal
panel).
146
Description
Screwdriver Pozidrive Shaft
Description
Solvent Selection Valve Upgrade Kit
2
Guide the SSV cable through the slots in the distance
sheet and route it through the slot in the pump front
metal panel to the internal connection socket.
InfinityLab LC Series 1260 Infinity II Binary Pump User Manual