Program 417: Maintenance Lead Battery P3-C Orion - Nortec UL60 Operation Manual

9 Tabular overview of the program procedures
9.5.4

Program 417: Maintenance Lead Battery P3-C Orion

17: Lead Battery P3-C Orion
Select Batteryprocessing:

P4: Maintenance
Enter:
None, nominal voltage and capacity are preselected by the program

Step 1:
Discharging with C until a voltage of 1.5 V is reached.
1
Step 2:
I-charge with C for 5 hours (limit 2.375 V/cell).
5
Step 3:
I-charge with C for 2.5 hours (limit 2.375 V/cell).
10
Step 4:
Discharging with C to 1.5 V for each cell. The here detected capacity will be used to ascertain the
1
effective capacity.
Step 5: (not applicable if capacity is below 100 %)
I-charge with C for 5 hours (limit 2.375 V/cell).
5
Step 6: (not applicable if capacity is below 100 %)
I-charge with C for 2.5 hour (limit 2.375 V/cell).
10
End of program
Display battery evaluation:
C>100%:BATTERY IS OK
or
C<99%:BATTERY WITH RECORD TAKE DISCHARGED BATTERY OUT OF SERVICE
90

Maintenance
© Nortec Electronics 2018