Rear Panel - Nortec UL60 Operation Manual

3 Operating and display elements

Rear Panel

The key opens the menu to choose a different language or the time and starts the programs.
Printer
The inbuilt record printer can be activated before starting, in between or after the battery treatment
by pressing the key all essential battery parameter as well as battery failures will be printed.
Celltester
The UL60 and the manual celltester will be connected via a 6-pole connector of the type VG 95
328 C10-6PN. Cell voltage upto +4.0 V can be measured with the celltester.
Battery connection
The UL60 and the battery is connected via different battery connection cables using two 4-pole
VG-electrical connectors according to VG 95 234.
USB-connection for USB flash drive
The recorded parameter can be stored on USB flash drive.
3.2 Rear Panel
Netcable
For voltage supply of the device at 230 VAC-net.
© Nortec Electronics 2018 17