Maintenace Instructions - Nortec UL60 Operation Manual

Working with automatic cell measuring adapter:
Risk of injury: The test prods of the cell measuring adapter are sharp-edged and can lead to
injuries if they are not handled properly.
Only suitable adapters suitable for each battery should be used.
Before positioning the cell measuring adapter, ensure that the measuring prods are freely movable.
This can be checked by slight lifting the cell measuring adapter. When mounting the adapter, the
adapter should not be jammed. The adapter is fixed with the lid holders of the battery. The measur-
ing prods must be placed on the battery poles or connectors.
The adapter should be stored on a soft base so the probes and the base can not be damaged.

2.2 Maintenace instructions

The battery charger / analyzer UL 60 should be kept clean and dry. You can clean it with a damp or
antistatic cloth. When cleaning do not use any chemical or abrasive cleaners.
The automatic cell measuring adapter is attached directly to the battery and should be cleaned regu-
larly. You can use clear or soapy water.
For the cleaning and maintenance of batteries, please refer to the currently valid maintenance instruc-
tions of the battery manufacturer.
© Nortec Electronics 2018 15