System Preferences; Language, Date, Time; Select Language - Nortec UL60 Operation Manual

7 System preferences

7 System preferences
Immediately after switching on the UL 60 carries out a device self-test. After that selftest and bat-
tery selection, open the menu by pressing
ternal timer uses a capacitor which provides the timer with current for about a month as long as the
device is not switched on.
In case a device is not in use for a long period you have to enter language and time again.
You get to an additional system menu using  :
 select Batterytype : 

System preference
At this place you find IP-address, device number and calibration.

7.1 Language, date, time

7.1.1

Select language

Press key to get to the menu for system preferences
Press key i.E.
After switching on the next time the display will be in English language.
Following languages can be chosen:
German

English

French *)

Dutch *)

Russian *)

 Danish *)
*) The help texts for these languages are displayed in English.
Additional languages are possible in case of customer request but require translations for display
and print indication by the customer.
32
for english to keep the language until you want to change it again.
the user can select language and time. The in-
Language, date, time
© Nortec Electronics 2018