Nortec UL60 Operation Manual page 44

8 Program selection
For determination of the maximum currents the capacity of the battery has to be indicated in Ah.
20: NiCd battery (manufacturer independent)

P420:  Please enter parameter:
RATED CAP:
After entering of the capacity confirm with
20: NiCd battery (manufacturer independent)

Program: Maintenance
Start: P=with print
 Entering
Battery type and treatment can again be selected.

Entering

step for 6 minutes. Enter
Enter the following details


and confirm with
Enter

given in. Confirm by pressing the key
In case a cell tester is connected the measurement of the cell voltage of the NiCd
batteries takes place automatically.
By pressing the button
start key once starts the recording of the measurement of the cell voltages on the positive cell
probe.
44
000.0 Ah
=without print
or you will return to a mask where
starts the testing routine with discharging with 1 hour current as the first
battery number
user number
.
starts a testing routine after battery number and user number have been
again you can start a printed record in between. Pressing the red
the start menu is shown on the dispay.
to request a printed record.
.
Battery data entry
© Nortec Electronics 2018