Carrier WIRELESS STANDARD SENSOR Installation Manual page 11

Transmission interval
Change of value threshold
Maximum operating life with no
light power or battery
Minimum lighting strength
required for operation
Minimum lighting strength
required to minimize battery
usage
Time to fully charge
Degree of protection
Operating environment
Housing
Weight
Dimensions
Compliance
Wireless Sensors
Installation Guide
Configurable in SensorBuilder. The sensor transmits:
•
On change of sensed value, and
•
At a regular interval (heartbeat). The default is every 900 seconds (15
minutes). Set the heartbeat to 0 to transmit only when value changes.
Configurable in SensorBuilder. The temperature must change by at least
.288°F (.156°C) (the default) for the sensor to send a change of value.
Up to 5 days
150 lux, constant
700 lux, constant
Depends on available lux. Sensor will fully charge in 8 hours @ 1000 lux, or 24
hours @ 333 lux.
IP20
32°F to 122°F (0° to 50°C)
5% to 95% relative humidity (non-condensing)
ABS plastic, bright white color
0.2 lb. (0.08 kg)
3.55 in. W x 3.77 in. H x 0.84 in. D
(9.03 cm W x 9.57 cm H x 2.13 cm D)
United States of America:
FCC CFR47, Chapter 1, Subchapter A, Part 15, Subpart B, Class B
Contains FCC ID: 2ANUH-LSTM300U
Canada:
Industry Canada Compliant, ICES-003, Class B
Contains IC ID: 6713A-STM300U
Europe:
Mark
Low Voltage Directive: 2014/35/EU
RoHS Compliant: 2011/65/EU
Australia and New Zealand:
C-Tick Mark, AS/NZS 61000-6-3
7
Overview of wireless sensors
CARRIER CORPORATION ©2018
All rights reserved