Table of Contents
Advertisement
Reusing configurations in SensorBuilder
If you customize the configuration of a Driver or a sensor in the Devices pane, you can save the configuration so
that you can reuse it later.
1
Select a Driver or a Device, and make edits in the Device Configuration pane.
2
Right-click the item and select Save configuration.
3
In the Sensor description window, give the configuration an intuitive name in the Short description field, and
then click Save.
4
Save the file with an intuitive name. The file is saved in c:\Program Files\SensorBuilder\custom.
5
To reuse the configuration in the future, right-click the Driver or Devices pane, select Load configuration, and
then select the custom file. You can then copy and paste the driver onto a sensor in the Devices pane as
follows:
a)
Right-click the driver, and then select Copy.
b)
Right-click a sensor in the Devices pane, and then select Paste.
c)
Right-click the sensor again, and then select Send configuration.
d)
Press the sensor's Learn button.
Reusing lists
If you give custom names to the Wireless Adapter or sensors, the names are stored only on your computer, not in
the devices. If you want to have the names appear on another computer, you can use right-click menu options to
save a list of devices or an individual sensor so that you can copy it to another computer.
For example, if you renamed devices in the Devices pane, you might want to have the same names available on
another computer. You can right-click the pane, select Save device list, type a file name, and then click Save.
Move the file to the other computer. Open SensorBuilder on that computer. Right-click the Devices pane, select
Load device list, and then open the file that you previously saved.
Wireless Sensors
Installation Guide
51
Appendix A: SensorBuilder overview
CARRIER CORPORATION ©2018
All rights reserved
Advertisement
Table of Contents
