Table of Contents
Advertisement
Troubleshooting the wireless sensor installation
•
If the wireless sensors and Wireless Adapter were installed before the space was furnished, use SensorScan
to check the signal between the sensors and Wireless Adapter. Review the Wireless device placement
guidelines (page 18) and follow the procedures in Verify signal strengths (page 27) to determine if something
is interfering with the signal.
•
If a Pro-F displays
reason why the communication has failed, you can press the sensor's Learn button for 4 seconds to reset the
sensor. This is equivalent to restarting a computer. See step 5 in Pair sensors to the Wireless Adapter (page
23) for the location of the Learn button.
Wireless Sensors
Installation Guide
, the sensor is not receiving a response from the Wireless Adapter. If you can find no
39
Installing the Wireless Adapter and sensors
CARRIER CORPORATION ©2018
All rights reserved
Advertisement
Table of Contents
