Chapter 3: Installing The Backed-Up Loads Panel And Meter; Installing The Backed-Up Loads Panel - SolarEdge StorEdge Installation Manual

Chapter 3: Installing the Backed-up Loads
Panel and Meter
This chapter describes installation of the backed-up loads panel and a meter.

Installing the Backed-up Loads Panel

Install a secondary AC panel for backed-up loads (not supplied by SolarEdge). Rewire the backed-up

loads through this panel.
Install one pole 25A as the main circuit b reaker.

Install a residual-current device (RCD) in accordance with the applicable local standards and directives

StorEdge Inverter Installation Guide MAN-01-00390-1.1

Chapter 3: Installing the Backed-up Loads Panel and Meter

Figure 13: Backed-up Loads Panel
25