Configuring the Inverter Using the LCD Light Button
Configuring the Inverter Using the LCD Light Button
Use the LCD light button for communication setup and for displaying the Error log and Warning Log .
There are fewer menus available when using this configuration option; however, the functionality of
these menus is the same as when using the internal LCD user buttons.
1. Turn the i nverter ON/OFF switch to OFF.
2. Press and hold down the LCD light button until the following message is displayed:
K e e p
f o r
p a i r i n g ,
t o
e n t e r
R e m a i n i n g :
Releasing the button displays the following menu:
O p t i m i z e r
L a n g u a g e
C o m m u n i c a t i o n
M a i n t e n a n c e
I n f o r m a t i o n
E x i t
3. Short-press (one second) to scroll down to the next menu option, and long-press (three seconds) to
select the item. You can use the Exit option in these menus to move up one menu level or to exit the
Setup mode from the main menu.
54
h o l d i n g
b u t t o n
r e l e a s e
m e n u . . .
3
s e c
p a i r i n g
< e n g >
StorEdge Inverter Installation Guide MAN-01-00390-1.1