Chapter 7: Setting Up Communication To The Monitoring Platform - SolarEdge StorEdge Installation Manual

Chapter 7: Setting Up Communication to the Monitoring Platform

Chapter 7: Setting Up Communication to the
Monitoring Platform
The inverter sends the following information to the monitoring platform:
Power optimizer information received via the DC power lines (the PV output circuit)

Inverter information

Information of any other connected devices

This chapter describes setting up communication between:
the inverter and the monitoring platform through the Internet (wired/ wireless), or through a cellular

connection
multiple inverters f or a master/slave configuration

Communication setup is not required for power harvesting, however it is needed for using the
monitoring platform.
CAUTION!
70
StorEdge Inverter Installation Guide MAN-01-00390-1.1