Chapter 6: User Interface
Chapter 6: User Interface
LCD User Buttons
Four buttons are located inside the inverter above the LCD panel and are used for controlling the LCD
menus, as shown below:
Use the four user buttons to control the LCD panel menus:
Esc: Moves the cursor (>) to the beginning of the currently displayed parameter; goes to the previous
menu, and cancels a value change with a long press (until Aborted is displayed).
Up (1) and Down (2): Moves the cursor from one menu option to another, moves among the
characters of a displayed parameter, and toggles between possible characters when setting a value.
: Selects a menu option and accepts a value change with a long press (until Applied is displayed).
The LCD screen displays status information of the system and various menus for configuration options.
The LCD panel and buttons are used during the following processes:
Operational mode: The LCD panel allows checking for proper system o peration. Refer to Status
Screens - Operational Mode on page 63 for a description of this option.
Setup mode: Upon installation, an installer may perform basic configuration .
Error messages: In the event of a problem, an error message may be displayed on the LCD panel.
For more information, refer to http://www.solaredge.com/sites/default/files/se-
inverter-installation-guide-error-codes.pdf and Inverter C onfiguration – Setup Mode on
page 51.
50
Figure 34: LCD Internal menu buttons
StorEdge Inverter Installation Guide MAN-01-00390-1.1