Dräger PM 8030 Instructions For Use Manual page 27

Operation
Communication by PM 8030 with other
DrSger machines
With the ivlonitorbus
e.g. remote switch is activated to switch PM 6030 on
from Standby, after start of the anaesthetic ventilator
Or
ior muting the other Drgger machines.
With the RS-232 Interface
For the transfer of warning, caution and advisory
messages: of measured values, for the combination of
function "Switching on and 2 minute suppression of
acoustic alarms" and for remote switching on of other
Dreger machines.
Communication with the PM 6010 Patient Monitor
(software 3.2):
measured values and warnings are transferred
according to the MEDIBUS format (baudrate of
1200 bit/s)
Communication with the PM 6020 Data Manager:
measured values, warnings and real time curves of
flow and pressure are transferred according to the
MEDIBUS format (baudrate of 19200 bit/s)
- Communication with a serial printer:
measured values and warnings are issued at pre-set
time intervals as ASCll-code
Printer setting:
Paper format DIN A411 1"
Page length 66 lines
Page width 80 characters
6 databits, 1 stopbit
non parity, Baudrate
optimum 9600 Bit/s
(1200...19200 Bit/s)