Unavailable Services In Ppp-Ip Passthrough And Serial Modem Modes - Multitech MultiConnect rCell 100 User Manual

a. Enter the Destination IP Address.
b. Enter the Community String.
c. Click Submit.
d. Click Save and Restart.
9. For SNMPv3:
a. Enter the Destination IP Address.
b. Enter Security Name.
c. Enter the Authentication Protocol from the drop-down, including NONE, MD5, or SHA1. If you
selected MD5 or SHA1 for Authentication Protocol:
i.
ii.
d. Enter the Encryption Protocol for SNMPv3 messages from the drop-down, including NONE, DES, or
AES-128. If you selected DES or AES-128 for Encryption Protocol:
i.
ii.
e. The SNMP Trap Destination list displays your recently added SNMP Trap Destination. To edit the
destination, click the pencil icon under Options.
f. To delete an existing destination, click the trash can icon under Options.
g. To save your changes, click Save and Restart.
To download the MIB file:
1. Click Download MIB in the far right corner of the device display.
2. Download/save the file from your browser.
Unavailable Services in PPP-IP Passthrough and Serial Modem
Modes
In both PPP-IP Passthrough and Serial Modem modes, many rCell services described in this document are non-
configurable and therefore do not appear in the device configuration menu. If you choose one of these modes, all
sections between this and the previous note on this subject are not available.
®
MultiConnect rCell 100 MTR-EV3 User Guide
Enter the Authentication Password, which is a password used to authenticate incoming
SNMPv3 requests.
Confirm the password.
Enter the Encryption Password.
Confirm the password.
CONFIGURING YOUR DEVICE
43