Table of Contents
Advertisement
Field
Mode Type
TCP Port
ICMP Port
Unavailable Services in PPP-IP Passthrough and Serial Modem
Modes
In both PPP-IP Passthrough and Serial Modem modes, many rCell services described in this document are non-
configurable and therefore do not appear in the device configuration menu. If you choose one of these modes, all
sections between this and the next note on this subject are not available.
Configuring IP Address and DNS Information for LAN
Your router manages traffic for your local area network (LAN). To change the IP address and DNS configuration:
1.
From Setup, select IP Configuration.
2.
To configure the address LAN information:
In the IP Address field, type the router's IP address. The default is 192.168.2.1.
In the Mask field, type the mask for the network. The default is 255.255.255.0.
In the Gateway field, type the IP address of the network's gateway (router). If this device is the gateway,
leave this field blank.
3.
To resolve domain names, configure domain name server information (DNS).
To allow the router to behave as a local DNS forwarder, check Enable Forwarding Server.
Note:
there is no record in the router's cache. New requests are cached in the router for future
requests.
In the Primary Server field, type the address of the primary DNS.
In the Secondary Server field, type the address of the secondary DNS.
The WAN DNS Servers field displays information about DNS servers, if any, that have been detected on
the WAN link of the router.
4.
Click Submit.
5.
To save your changes, click Save and Restart.
Configuring Dynamic Domain Naming System (DDNS)
This feature allows your router to use a DDNS service to associate a hosted server's domain name with a
dynamically changing internet address. To configure your router to use DDNS:
1.
From Setup, select DDNS Configuration.
2.
In the Configuration group, check Enabled.
3.
In the Service drop-down list, select a DDNS service. To define a service that isn't listed choose Custom.
a.
For custom DDNS service, in the Service field, type the DDNS server's URL.
®
MultiConnect
rCell 100 MTR-LTE User Guide
Description
Use the drop-down list to select the mode type: ICMP or TCP. Default is ICMP.
(Active Monitoring Mode)
Enter the TCP Port number to connect to the host. (Mode TCP)
Enter the number of ICMP pings to be sent to the specified host. Default is 10.
(Mode ICMP)
When a DNS request is received, the router forwards the request to a remote DNS server if
CONFIGURING YOUR DEVICE
33
Hide quick links:
Advertisement
Table of Contents
