Multitech MultiConnect rCell 100 User Manual page 88

DEVICE ADMINISTRATION
7. Click Finish.
8. To save your changes, click Save and Restart.
For Ping Failure:
1. Check Enabled.
2. Under Ping Details, select the Network Interface from the drop-down.
3. Enter the IP Address or URL that you want to ping.
4. Enter the Count.
5. Enter the Failure Threshold.
6. Enter the Ping Interval.
7. Under Notification Options, select the recipients from the drop-down in Recipient Group.
8. In Notify, the constant value is Always.
9. Select how you want to send alerts by clicking Email, SMS or SNMP.
10. Click Finish.
11. To save your changes, click Save and Restart.
For Security Violation:
1. Check Enabled.
2. Under Notification Options, select the recipients from the drop-down in Recipient Group.
3. In Notify, the constant value is Always.
4. Select how you want to send alerts by clicking Email, SMS , or SNMP.
5. Click OK.
For Flash Memory Violation:
1. Check Enabled.
2. Under Notification Options, select the recipients from the drop-down in Recipient Group.
3. In Notify, the constant value is Always.
4. Select how you want to send alerts by clicking Email, SMS , or SNMP.
5. Click OK.
For Resource Overuse:
1. Check Enabled.
2. Under Notification Options, select the recipients from the drop-down in Recipient Group.
3. In Notify, the constant value is Always.
4. Select how you want to send alerts by clicking Email, SMS , or SNMP.
5. Click OK.
The following notifications are only available on non-LTE devices:
For Wi-Fi Interface Failure:
1. Check Enabled.
2. Enter the Duration in seconds.
3. Under Notification Options, select the recipients from the drop-down in Recipient Group.
88
®
MultiConnect rCell 100 MTR-EV3 User Guide