Unavailable Services In Ppp-Ip Passthrough And Serial Modem Modes; Configuring Ip Address And Dns Information For Lan - Multitech MultiConnect rCell 100 User Manual

CHAPTER 6 CONFIGURING YOUR DEVICE
■
IP Address: Current cellular WAN IP address issued to this device by the cellular carrier.
■ Roaming: Indicates whether or not this device's cellular link is currently connected to its home network.
■ Phone number: Device's cellular phone number also known as Mobile Directory Number (MDN). This
field is blank if the MDN is not stored in the SIM card.
■
Tower: Tower ID of the cellular tower currently providing cellular service to this device.
■
Wi-Fi:
■ Mode: Indicates the current Wi-Fi mode. Options include None, Wi-Fi as WAN, or Wi-Fi Access Point. For
configuration go to Wireless > Wi-Fi.
■
MAC Address: Media Access Control Address used to uniquely identify the Wi-Fi interface. This MAC will
be the same as the Ethernet MAC when in Access Point mode.
■ State: Current state of the Wi-Fi.
■ SSID: In Access Point mode, this is the Service Set Identifier (SSID) for this device's Wi-Fi Access Point. In
Wi-Fi As WAN mode, this is the SSID of the Wi-Fi Access Point this device is currently connected to or
trying to connect to. For configuration go to Wireless > Wi-Fi.
■ Security: In Access Point mode, this is the current security protocol of this device's Wi-Fi Access Point. To
configure go to Wireless > Wi-Fi.
■
Bluetooth:
■ State: Current state of the Bluetooth link. To configure go to Wireless > Bluetooth.
■ MAC Address: Media Access Control Address used to uniquely identify the Bluetooth interface.
■ Device Name: Name of Bluetooth device configured to link to. For configuration go to Wireless >
Bluetooth.
■
Device MAC: Media Access Control Address of the Bluetooth device configured to link to. To configure
go to Wireless > Bluetooth.
Unavailable Services in PPP-IP Passthrough and Serial Modem
Modes
In both PPP-IP Passthrough and Serial Modem modes, many rCell services described in this document are non-
configurable and therefore do not appear in the device configuration menu. If you choose one of these modes, all
sections between this and the next note on this subject are not available.

Configuring IP Address and DNS Information for LAN

Your router manages traffic for your local area network (LAN). To change the IP address and DNS configuration:
1. From Setup, select IP Configuration.
2. To configure the address LAN information:
In the IP Address field, type the router's IP address. The default is 192.168.2.1.
In the Mask field, type the mask for the network. The default is 255.255.255.0.
In the Gateway field, type the IP address of the network's gateway (router). If this device is the gateway,
leave this field blank.
3. To resolve domain names, configure domain name server information (DNS).
To allow the router to behave as a local DNS forwarder, check Enable Forwarding Server.
34
®
MultiConnect rCell 100 MTR-H5 User Guide