Multitech MultiConnect rCell 100 User Manual page 68

DEFINING TUNNELS
h. Hash Algorithm as DEFAULT.
i. Encryption Cipher as DEFAULT.
j. Min. TLS Version as 1.2.
k. TLS Cipher Suite as DEFAULT as 1.2.
l. Enter the contents of the following files generated from the easy-rsa tool. You can copy and paste
this content from the certificate files after opening from a text editor like Notepad. (all required):
i.
ii.
iii.
iv.
m. Select the Encryption Cipher
7. Click Next.
Note: Use the same CA PEM certificate and parameters as the server for the OpenVPN clients .
8. Remote Network Routes create a route from the server network to the client network. This allows the
server to get an access to the client's network. In the OpenVPN Tunnel dialog box, under Remote
Network Routes:
a. Choose an available Saved Network as your remote network route from the drop-down if desired
(optional).
b. Or enter the Remote Network Route (should be the client subnet). For example, if the client IP
address is 192.168.3.1, enter 192.168.3.0.
c. Enter the Remote Network Mask (usually 255.255.255.0).
d. You may enter Gateway (optional).
e. Click Add Route.
9. The system displays your recently-added Push Route with the client subnet (remote network route +
mask).
10. Push Routes create a route from client's network to the server's network. This allows clients to get access
to the server's network. Under Push Routes:
a. Click Client To Client box if you want this optional feature (this establishes a connection between
multiple clients that are connected to the server).
b. Choose an available Saved Network as your push route from the drop-down if desired (optional).
c. Or enter the Remote Network Route (same address as the server subnet above).
d. Or enter the Remote Network Mask (same as above).
e. You may enter Gateway (optional).
f. Click Add Route.
Note: If you use Static Key Authorization Mode, the Push Routes do not work.
11. The system displays your recently-added Push Route with the client subnet (remote network route +
mask).
12. Click Next.
13. The system displays the Configuration Preview window (read-only).
14. Click Finish.
68
CA PEM (.crt)
Diffie Hellman PEM (.pem)
Server Certificate PEM (.crt)
Server Key PEM (.key)
®
MultiConnect rCell 100 MTR-EV3 User Guide