Viewing Information About Wi-Fi Clients Using Your Wireless Network; Setting Up Wi-Fi As Wan - Multitech MultiConnect rCell 100 User Manual
Hide thumbs
Also See for MultiConnect rCell 100:
- Quick start manual ,
- User manual (82 pages) ,
- Configuration manual (38 pages)
Table of Contents
Advertisement
2.
To select WEP mode:
a.
From the Encryption drop-down list, select the encryption to be used. Choose from 64 bit 10 hex
digits or 128 bit 26 hex digits.
b.
To generate a key from a phrase, in the Passphrase field, type a phrase. Click Generate.
c.
To manually enter keys, type the keys in the Key 1, Key 2, Key 3 or Key 4 fields.
3.
To select WPA-PSK, WPA2-PSK or WPA-PSK/WPA2-PSK modes:
a.
Select the WPA Algorithm from the drop-down list. Choose from TKIP, AES or TKIP+AES.
b.
In the Shared Key field, type the key that is used for encrypting and decrypting the data.
c.
To remove the mask characters, thereby making the Shared Key visible, check Unmask.
4.
When done, click Submit.
5.
To save your changes, click Save and Restart.
Viewing Information About Wi-Fi Clients Using Your Wireless Network
To view information about clients (such as computers, tablets, and smart phones) that are connected to your
router's Wi-Fi access point:
1.
The Clients group displays a list of clients using your router's Wi-Fi.
2.
To update the list, click Refresh.
Setting Up Wi-Fi as WAN
To setup the router's Wi-Fi as WAN:
1.
Go to Wireless > Wi-Fi to display the Wi-Fi window.
2.
From the Wi-Fi Mode drop down list, select Wi-Fi as WAN.
3.
Searching for available Wi-Fi networks starts automatically. After 30 to 60 seconds, a list of detected Wi-
Fi Access Points appears in the Available Networks group.
4.
In the Available Wi-Fi Networks group, click the SSID for the Wi-Fi access point you want to use. The Add
Saved Network window opens. Here are the available fields to enter information:
Network Name
SSID
Security Mode: None, WEP, WPA, WPA-PSK, WPA-2, or WPA-2-PSK
Username
Password
Unmask (Check, Uncheck)
WPA Algorithm: TKIP, +AES, TKIP, or AES
Shared Key
Key Index: 0 - 3
Network Key
IEEE 802.1x
5.
Review the information, enter any required security info, then click Finish. The Wi-Fi access point you just
added appears in the Saved Wi-Fi Networks group.
®
MultiConnect
rCell 100 MTR-EV3 User Guide
SETTING UP WIRELESS FEATURES
45
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiConnect rCell 100 and is the answer not in the manual?
Questions and answers