Table of Contents
Advertisement
4.3
Insert workpiece
The machine vice serves
as clamping device of
the workpiece.
The machine vice con-
sists of
the working table,
the clamping jaws,
the hand wheel.
The clamping jaws at the
front
and
moved
this way the machine
vice will clamp the clamp
parts centrically.
Insert the workpiece
which needs to be
sawed into the
machine vice.
ATTENTION!
Danger of overturning of the
circular metal saw if the
machine substructure had
not been fixed to the floor.
Support long workpieces
before pushing the piece to
be cut into the machine vice.
Turn the hand wheel to the
right until the workpiece is
firmly clamped.
CAUTION!
Make sure if the workpiece is
really firmly clamped.
back
are
simultaneously,
Clamping jaws
Workpiece
Hand wheel
Illustration: 4-2: Machine vice
Workpiece
Material stand
Illustration: 4-3: Machine vice
Workpiece
Hand wheel
Illustration: 4-4: Hand wheel
Operation
Page 25
Advertisement
Table of Contents
