Mount The Saw Blade; First Use; Checking; Direction Of The Saw Teeth - Palmgren CS 250 Operating Manual

Assembly
3.4.6

Mount the saw blade

Mount your saw blade
3.5

First use

WARNING!
Personnel and equipment may be endangered if the circular metal saw is first used by
inexpert staff.
We do not take liability for any damage caused by incorrect commissioning.
3.5.1

Checking

Check the following.
ATTENTION!
Danger of cutting! Proceed with caution during the work described below. Use the pre-
scribed protection equipment.
3.5.2

Direction of the saw teeth

Check the direction of the
saw teeth. The saw
teeth need to be ori-
ented in the direction of
the illustrated arrow.
3.5.3

Check the oil level in the worm gear

Check the oil level in the worm gear of the circular metal saw.
Fill in gear oil, if required.
Page 22
"Mounting and replacing the saw blade" on page 39
"Check oil level, change gear oil." on page 36
Running direction
Saw blade
Illustration: 3-5: Running direction of saw blade