Mount The Lever Arm - Palmgren CS 250 Operating Manual

3.4.3 Mount the saw on the machine substructure
ATTENTION!
Danger of crushing
and overturning.
Proceed with caution
during the work
described below.
CAUTION!
The circular metal saw
needs to be mounted
on the machine sub-
structure by at least
two persons.
Put the circular metal saw on the machine substructure.
Fasten the circular metal saw with the hexagon socket screws on the machine substructure.
3.4.4

Mount the lever arm

Remove the screw cap on the
saw head.
Mount the lever arm on the saw
head.
Set up the lever arm.
Counter the lever arm attached to
the hexagonal nut.
Connect the cable connection
with the operating element.
Screw cap
Hand-actuated
auxiliary switch
Lifting arm
Operating element
Connecting cable-
hand-actuated
auxiliary switch
Hexagonal nut
Fitting connecting
cable
Illustr.: 3-4: Mount lever arm
Assembly
Page 21