Table of Contents
Advertisement
1
Safety
Glossary of symbols
•
This part of the operating manual
•
explains the meaning and use of the warning references contained in the operating manual,
•
explains how to use the circular metal saw properly,
•
highlights the dangers that might arise for you or others if these instructions are not obeyed,
•
tells you how to avoid dangers.
In addition to this operating manual please observe
•
applicable laws and regulations,
•
legal regulations for accident prevention,
European standards must be observed during installation, operation, maintenance and repair of
the circular metal saw.
If European standards are not applied in the national legislation of the country of destination, the
specific applicable regulations of each country must be observed.
Where necessary, the required measures must be taken to comply with the specific regulation of
each country before the circular metal saw is first used.
ALWAYS KEEP THIS DOCUMENT CLOSE TO THE CIRCULAR METAL SAW FOR FUTURE
REFERENCE.
INFORMATION
If you are not able to solve a problem using this manual, please do not hesitate to contact us for
further professional advice:
C.H.HANSON
2000 North Aurora Rd.
Naperville, IL 60563
Page 4
gives additional indications
calls on you to act
enumerations
Safety
Advertisement
Table of Contents
