Table of Contents
Advertisement
Safety
1.11
Accident report
Inform your superiors and Colovos Company immediately in the event of accidents, possible
sources of danger and any actions which almost led to an accident (near misses).
These near misses can have many causes.
The sooner they are notified, the faster the causes can be eliminated.
INFORMATION
In the description of the execution of work with and on the circular metal saw, we highlight the
dangers specific to that work.
1.12
Electrical system
Have the machine and/or the electric equipment checked regularly, and at least every six
months.
Eliminate immediately all defects such as loose connections, defective wires, etc.
A second person must be present during work on live components, to disconnect the power in
the event of an emergency.
Disconnect the circular metal saw immediately if there are any anomalies in the power supply!
"Maintenance" on page 34,
Illustr.: 1-1: "Rear cover" on page 11
Page 14
"Ersatzteilliste - Spare part
s list - CS250" on page 44
Advertisement
Table of Contents
