Table of Contents
Advertisement
Safety
•
protective goggles or face guard,
•
protective gloves,
•
safety shoes with steel caps,
•
ear protection.
Before starting work, make sure that the prescribed individual protection gear is available at the
workplace.
CAUTION!
Dirty or contaminated personal protection gear can cause disease. Clean your personal
protection gear after each use, regularly, at least once a week.
Personal protection gear for special work
Protect your face and eyes: During all work, and specifically work during which your face and
eyes are exposed to hazards, a safety helmet with a face guard should be worn.
Use protective gloves when lifting or handling pieces with sharp edges.
Wear safety shoes when fitting, dismantling or transporting heavy components.
1.9
Safety during operation
In the description of work with and on the circular metal saw we highlight the dangers specific to
that work.
WARNING!
Prior to activating the circular metal saw please double-check that this will
•
not endanger anybody,
•
not cause any damage to property.
Avoid unsafe working practises:
•
Make sure your work does not endanger anyone.
•
The instructions in this manual need to be observed during assembly, handling, mainte-
nance and repair.
•
Do not work on the circular metal saw if your concentration is reduced, for example, because
you are taking medication.
•
Observe the rules for preventing accidents issued by your association for the prevention of
occupational accidents and safety in the workplace or other inspection authorities.
•
Stay at the circular metal saw until all rotating parts have come to a halt.
•
Use prescribed protection gear. Make sure to wear a well-fitting work suit and, where neces-
sary, a hairnet.
•
Inform the inspector of any danger or failure.
Page 12
Advertisement
Table of Contents
