Disposal Of Lubricants And Coolants; Disposal - Palmgren CS 250 Operating Manual

Circular metal saw
Table of Contents

Advertisement

Appendix
8.5.5

Disposal of lubricants and coolants

ATTENTION
Please imperatively make sure to dispose of the used coolant and lubricants in an envi-
ronmentally compatible way. Observe the disposal notes of your municipal waste man-
agement companies.
INFORMATION
Used coolant emulsions and oils should not be mixed up since it is only possible to reuse used
oils which had not been mixed up without pre-treatment.
The disposal notes for the used lubricants are made available by the manufacturer of the lubri-
cants. If necessary, request the product-specific data sheets.

Disposal

8.6
Disposal of used electric and electronic machines
(Applicable in the countries of the European Union and other European countries with a sepa-
rate collecting system for those devices).
The sign on the product or on its packing indicates that the product must not be handled as
common household waist, but that is needs to be delivered to a central collection point of recy-
cling. Your contribution to the correct disposal of this product will protect the environment and
the health of your fellow men. The environment and the health are endangered by incorrect dis-
posal. Recycling of material will help to reduce the consumption of raw materials. Your District
Office, the municipal waste collection station or the shop where you have bought the product will
inform you about recycling of this product.
Page 48

Advertisement

Table of Contents
loading

Table of Contents