Installation And Assembly; Requirements Of The Installation Site; Fasten The Substructure Of The Circular Metal Saw Cs 250 On The Floor - Palmgren CS 250 Operating Manual

3.4

Installation and assembly

3.4.1

Requirements of the installation site

Organise the work area around the circular metal saw in accordance with local safety regula-
tions.
Operation, maintenance and repair in the work area must not be hindered.
INFORMATION
The mains plug of the circular metal saw must be freely accessible.
3.4.2

Fasten the substructure of the circular metal saw CS 250 on the floor

Fasten the substructure on the floor with shear connector screws M10.
Illustration: 3-1: Machine substructure CS 250
Page 20
"Dimensions" on page 16
Assembly